? 2017 teledyne relays (800) 284-7007 ? www.teledynecoax.com mmc series page 1 mmc series\022017\q1 coax switches miniature matrix: mmc series controlled with usb or ethernet electrical characteristics (switches only) form factor multi-throw, break before make frequency range up to dc-40 ghz characteristic impedance 50 ohms operate time 15 ms (max.) release time 15 ms (max.) actuation voltage available 24 vdc actuation current, max. @ ambient 170 ma/switch environmental and physical characteristics operating temperature ?40c to 65c standard actuator life 5,000,000 cycles connector type sma, 2.9mm weight non-terminated 1 switch 2 switches 26 oz. (737 g) (max.) 32 oz. (907 g) (max.) weight terminated 1 switch 2 switches 54 oz. (1531 g) (max.) 60 oz. (1701 g) (max.) part number description the mmc series is an ideal solution that consists of multi-throw, electromechanical coaxial switches designed to switch a microwave signal from a common input to any of 3, 4, 5, 6, 7 or 8 outputs. the characteristic impedance is 50 ohms. with the normally open actuator, all paths are open when the switch is de-energized. the mmc series is designed to allow the remote operation of 1 to 2 single pole multi throw switches. remote operation is accomplished via tcp/ip commands to the matrix?s ethernet interface. switch control is also accessible via the usb virtual serial port, using the provided command set. through these interfaces the coax switch can be switched to the desired position and its position can be read for veri cation. the default switch position at power up can be set by the user. the mmc will feature a graphical user interface (gui), which will enable user to control switches through graphical icons and visuals. * only available in normally open models, up to 18ghz see page 5, for part number list for switches used ** only available in enclosure b additional information interface usb or tcp/ip host operating system windows, mac, linux operating system embedded included items ? ac/dc power adapter ? usb cable ? power cord ? installation cd ? ethernet cable build your box frequency range (select one) : remote control (select one) : number of throws (select one) : sp3t sp5t sp4t sp6t sp7t* sp8t* number of switches (select one) : usb only usb & ethernet dc-18ghz dc-26.5ghz dc-40ghz typical rf characteristics frequency dc?6 ghz 6?12 ghz 12?18 ghz 18?26.5 ghz 26.5?34 ghz* (40 option) 34-40 ghz* (40 option) insertion loss, db, typ. 0.20 0.40 0.50 0.90 1.00 1.50 isolation, db, typ.. 70 60 60 50 50 50 vswr , typ. 1.25:1 1.40:1 1.50:1 1.80:1 1.90:1 2.00:1 for speci c rf performance data please refer to coax switch part number list in glossary (page 5) non-terminated (enclosure a) terminated (enclosure b) 1 (enclosure a) 1 (enclosure b) 2 (enclosure a) 2 (enclosure b) actuation type (select one): normally open latching** for additional options, please contact factory.
mmc series page 2 specifications are subject to change without notice ? 2016 teledyne coax switches mmc series\052016\q2 coax switches miniature matrix: mmc series controlled with usb or ethernet mechanical outline for enclusre a front view block diagram example microcontroller tcp/ip usb 24 dc input enclosure a: up to 2 non-terminated spmt switches max. length with switches= 7.75 (196.85)
? 2017 teledyne relays (800) 284-7007 ? www.teledynecoax.com mmc series page 3 mmc series\022017\q1 coax switches miniature matrix: mmc series controlled with usb or ethernet mechanical outline for enclusre b enclosure b: up to 2 terminated sp3t to sp6t switches
mmc series page 4 specifications are subject to change without notice ? 2016 teledyne coax switches mmc series\052016\q2 coax switches miniature matrix: mmc series controlled with usb or ethernet mechanical outline for enclusre b enclosure b: up to 2 terminated sp7t to sp8t switches ordering code f = failsafe, l = latching 2 f l - hf40t # of switches # of throws: c = 3 d = 4 e = 5 f = 6 g = 7 h = 8 options example: options none = sma dc-18ghz t = terminated (can stack) hf26 = sma dc-26.5ghz hp40 = 2.92 mm dc-40ghz
|
